|
|
|
A2EX FHC
EExde
IIC compression gland
for unarmoured cable housed in conduit
|
|
Features and
Benefits
• For indoor/outdoor use and
hazardous areas. (A2E Type)
• For use with all types of unarmoured cable housed in rigid or
flexible conduit.
• Fitted with two specially formulated elastomeric seals. Inner
seal seals on
the cable sheath. Harder outer seal grips the cable, giving superior cable retention
and
IP rating
• Fitted with a rotating female connection for connection to
conduit.
• Manufactured from high quality brass and nickel plated and stainless steel.
• Supplied with a polypropylene sealing gasket.
|
|
|
|
|
|
| Technical
Data |
|
Type |
A2EX FHC |
|
Gland Material |
Brass
(Nickel Plated), Stainless Steel |
|
Seal Material |
Thermoplastic
Elastomer (Silicone on request) |
|
Cable Type |
Unarmoured
in Conduit |
|
Sealing Area |
Inner
sheath |
|
Optional Accessories and Tools |
Locknut,
Shroud, Earth Tag, Adaptor / Reducer |
|
|
|
| Standards
and Certifications |
|
Hazardous Area
Classification |
|
SANS / SABS IEC |
Zone 1, 2, 21and 22 Eexde IIC and DIP |
|
CENELEC / ATEX |
Category 2, Category 3, EExde II 2 GD |
|
Compliance Code |
Certification No. |
|
CENELEC / ATEX |
|
EN50014:1997E |
|
DEMKO 01 ATEX 130325X |
|
EN50018:2000E |
|
DEMKO 01 ATEX 130325X |
|
EN50019:2000E |
|
DEMKO 01 ATEX 130325X |
|
EN50281-1-1:1999E |
|
DEMKO 01 ATEX 130325X |
|
SANS / SABS / IEC |
|
|
|
SANS/SABS 1213, SABS 1031 |
SABS S/W 443UX |
|
SANS/SABS IEC 60079-0 |
2000 |
SABS S/W 443UX |
|
SANS/SABS IEC 60079-1 |
2001 |
SABS S/W 443UX |
|
SANS/SABS IEC 60079-7 |
2001 |
SABS S/W 443UX |
|
SANS/SABS IEC 60529 |
1989 |
SABS S/W 443UX |
|
SANS/SABS IEC 61241.1.1 |
2000 |
SABS S/W 443UX |
|
|
| Ingress
Protection |
IP66/67/68 |
| Operating
Temperature |
-30°C
TO +130°C |
|
Special Conditions for
Safe Use - X
Glands must be used as
part of a certified assembly in surface installations only.
Not for use on Exd enclosures that are larger than 2000cm3 volume
in group IIC gases in zone 1 areas.
|
|
|
