|
|
|
FLP-TR
EExd I / IIC compression gland
for
use with unarmoured cable
|
|
Features and
Benefits
• Fitted with specially
formulated captive elastomeric seals, built-in safety.
• No loose parts that can get lost.
• Provided with an extra hard gripper seal to grip cable.
• Manufactured from high quality brass, nickel plated and stainless steel.
• Complete with an orange thread cap/safety gauge for
correct
gland selection.
|
|
|
|
|
|
| Technical
Data |
|
Type |
FLP TR |
|
Gland Material |
Brass (Nickel Plated), Stainless Steel |
|
Seal Material |
Thermoplastic Elastomer |
|
Cable Type |
Unarmoured TRS |
|
Sealing Area |
Outer sheath |
|
Optional Accessories |
Shroud, Adaptor/Reducer |
|
|
|
| Standards
and Certifications |
|
Hazardous Area
Classification |
|
|
SANS/SABS IEC |
Zone 1, 2, 21and 22
Exd I / IIC, Exe I / IIC and DIP |
|
CENELEC / ATEX |
Category 2, Category
3, EExde I / II 2 GD, EExd I M2 |
|
Compliance Code |
Certification No. |
|
CENELEC
/ ATEX |
|
|
EN50014:1997E |
DEMKO 01 ATEX 130325X
EPSILON 06 ATEX 2044 |
|
EN50018:2000E |
DEMKO 01 ATEX 130325X
EPSILON 06 ATEX 2044 |
|
EN50019:2000E |
DEMKO 01 ATEX 130325X
EPSILON 06 ATEX 2044 |
|
EN50281-1-1:1999E |
DEMKO 01 ATEX 130325X
EPSILON 06 ATEX 2044 |
|
SANS
/ SABS / IEC |
|
|
|
SANS 808 |
SABS MS/W 454U |
|
SANS/SABS IEC 60079-0 |
2000 |
SABS MS/W 454U |
|
SANS/SABS IEC 60079-1 |
2001 |
SABS MS/W 454U |
|
SANS/SABS IEC 60079-7 |
2001 |
SABS MS/W 454U |
|
SANS/SABS IEC 60529 |
1989 |
SABS MS/W 454U |
|
SANS/SABS IEC
61241.1.1 |
1999 |
SABS MS/W 454U |
|
CHINESE |
|
GB3638. 1-2000 part 1 |
|
CNEx09 0428U |
|
GB3638. 2-2000 part 2 |
|
CNEx09 0428U |
|
GB3638. 3-2000 part 3 |
|
CNEx09 0428U |
|
GB12476. 1-2000 |
|
CNEx09 0428U |
|
| Ingress
Protection |
IP66/67/68 |
| Operating
Temperature |
-30°C
to + 130°C |
|
Special Conditions for
Safe Use - X
Glands that incorporate a seal with an uncompressed height of less than 20mm shall not be used with EEX d IIC apparatus that has a volume in excess of 2000cc. If mounted in flame proof enclosures, make sure that at least threads are engaged and that the depth of engagement of enclosures smaller than 100
cm3 are at least 5mm and for enclosures larger than 100
cm3 at least 8mm.
|
|
|
