|
|
|
Posi Grip
EExe compression gland
for unarmoured cable
|
|
Features and
Benefits
• For use in highly corrosive and hazardous areas.
• All brass parts encapsulated in a non-corrosive body.
• Complete with a hard gripper seal, deluge proof O-ring and
elastomeric
inner seal for complete ingress protection IP68.
• Supplied with a polypropylene gasket.
|
|
|
|
|
|
| Technical
Data |
|
Type |
POSIGRIP |
|
Gland Material |
Brass encapsulated in Glass
Reinforced Polyester/PBT |
|
Seal Material |
Thermoplastic Elastomer
(silicone on request) |
|
Cable Type |
Unarmoured |
|
Sealing Area |
Outer sheath |
|
Optional Accessories |
Locknut |
|
|
|
| Standards
and Certifications |
|
Hazardous Area
Classification |
|
IEC, SABS & AUS
Ex, CNEx |
|
|
Zone 1, 2, 21and 22
Exe IIC and DIP |
|
CENELEC / ATEX |
|
|
Category 2, Category
3, EExe II 2 GD |
|
|
Compliance Code |
|
|
Certification No. |
|
CENELEC
/ ATEX |
|
|
|
|
EN50014:1997E |
|
|
DEMKO 01 ATEX
130325X |
|
EN50019:2000E |
|
|
DEMKO 01 ATEX
130325X |
|
EN50281-1-1:1999E |
|
|
DEMKO 01 ATEX
130325X |
|
SANS
/ SABS / IEC |
|
|
|
|
SANS/SABS 1213 |
|
SABS S/W 458U |
|
SANS/SABS IEC
60079-0 |
2000 |
|
SABS S/W 458U |
|
SANS/SABS IEC
60079-7 |
2001 |
|
SABS S/W 458U |
|
SANS/SABS IEC 60529 |
1989 |
|
SABS S/W 458U |
|
SANS/SABS IEC
61241.1.1 |
1999 |
|
SABS S/W 458U |
|
AUSTRALIAN |
|
|
|
|
AS 2380.6 |
|
|
AUS Ex 2404U |
|
AS 1939 |
|
|
AUS Ex 2404U |
|
NSW MDA |
|
|
Exe 3171 |
|
CHINESE |
|
|
|
GB3638. 1-2000 |
|
CNEx09 0429U |
|
GB3638. 3-2000 |
|
CNEx09 0429U |
|
GB12476.1-2000 |
|
CNEx09 0429U |
|
| Ingress
Protection |
IP66/67/68 |
| Operating
Temperature |
-30°C
to +130°C |
|
|
|
|
